Setting Up The Charging Cradle; Connecting The Charging Cradle - Gigaset C610H Manual

First steps

Setting up the charging cradle

The charging cradle is designed for use in dry rooms in a temperature range of +5°C to
+45°C.
¤ Set up the charging cradle on a flat, non-slip surface or mount it on the wall
(¢ page 45).
Please note
Pay attention to the range of the base.
This is up to 300 m in unobstructed outdoor areas and up to 50 m inside buildings.
The range is reduced when Eco Mode (¢ page 34) is activated.
The phone's feet do not usually leave any marks on surfaces. However, due to the multi-
tude of different varnishes and polishes used on today's furnishings, the occurrence of
marks on the surfaces cannot be completely ruled out.
Please note:
u Never expose the telephone to the influence of heat sources, direct sunlight or other
electrical devices.
u Protect your Gigaset from moisture, dust, corrosive liquids and fumes.

Connecting the charging cradle

2
To disconnect the plug from the charging cradle, press the
release button
3
8
1
and disconnect the plug 4.
¤ Connect the flat plug from the power
adapter 1.
¤ Plug the power adapter into the plug
socket 2.
4
3