Panasonic DMR-EZ47VP Service Manual page 18

DMR-EZ47VP / DMR-EZ475VP
Error Code Diagnosis contents
PLEASE Unit is in termination process
WAIT
UNFORM Unformatted disc error
AT
7.1.2. (DVD) Special Modes Setting
Mode name
TEST Mode
Rating password
Service Mode
Forced disc eject
Forced power-off
Aging
Unit is in termination process now.
"BYE" is displayed and power will be turned
off.
In case "Quick Start" of setup menu is ON, it
is displayed in restoration operation for AC
off.
You have inserted an unformatted DVD-RAM
or DVD-RW that is unformatted or recorded
on other equipment.
Item
Description
*All the main unit´s parameters are initialized.
The audiovisual level setting password is
initialized to "Level 8".
Setting every kind of modes for servicing.
*Details are described in "7.1.3. (DVD)
Service Modes at a glance".
Removing a disc that cannot be ejected.
The tray will open and unit will shift to P-off
mode.
*During Schedule Recording, Forced disc
eject is invalid.
While Demonstration Lock is being set, this
Forced disc eject function is not accepted.
When the power button is not effective while
power is ON, turn off the power forcibly.
*When Schedule Recording is ON, execute
"Forced Power-off" after releasing Schedule
Recording.
Perform sequence of modes as * Aging
Description shown below continually.
Description Monitor Display
No display
FL display
No display
The display before
leaves.
Display in P-off mode.
Display following the then mode.
18
Automatic FL display
"0" is displayed one by one.
Key operation
Front Key
Press [VHS to DVD COPYING],
[REC] and [OPEN/CLOSE] keys
simultaneously for five seconds
when power is off.
When the power is on (E-E mode).
While the tray is open, press [REC]
and [PLAY] simultaneously for 5
seconds.
When the power is off, press [VHS
to DVD COPYING], [OPEN/CLOSE]
and [STOP] keys simultaneously for
5 seconds.
execution When the power is off, press
[STOP] and [CH
simultaneously for 5 seconds.
Press [POWER] key over than 10
seconds.
Set DRIVE SELECT to DVD.
When the power is ON, press [CH
DOWN], [VHS to DVD COPYING]
and [OPEN/CLOSE]
simultaneously for over 5 seconds
and less than 10 seconds.
NOTE1:
If Unit has not turned into Aging
mode by operations shown above,
execute TEST MODE once and re-
execute operation shown above.
(*All the main unit's parameters are
initialized by TEST mode.)
NOTE2:
If the unit has hung-up because of
pressing keys for over 10 seconds,
once turn off the power, and re-
execute this command.
*When releasing Aging mode,
press [POWER] key, AC-OFF.
UP] keys