Texas Instruments TI-84 Plus C Getting Started page 42

Selecting an Item from a Menu
You can select an item from a menu in three ways.
• Press the number or letter of the
item you want to select. The
cursor can be anywhere on the
menu, and the item you select
does not need to be displayed
on the screen.
Press † or } to move the cursor
•
to the item you want, and then
press Í.
After you select an item from a
menu, the TI-84 Plus C typically
displays the previous screen.
• Move the cursor to the item you
want, and then press Ã. For
most commands, the Catalog
Help syntax editor displays the
correct syntax. Enter the syntax
using the displayed help, and
then press t a to paste.
The Catalog Help pastes the
complete command.
Press t b to escape without
pasting the command.
Note: On the
LIST NAMES
items 1 through 9 and 0 are labeled in such a way that you can select
them by pressing the appropriate number key. To move the cursor to the
first item beginning with any alpha character or q, press the key
combination for that alpha character or q. If no items begin with that
character, the cursor moves beyond it to the next item.
Leaving a Menu without Making a Selection
You can leave a menu without making a selection in any of four ways.
38 Getting Started with the TI-84 Plus C Silver Edition
, , and
PRGM EXEC
menus, only
PRGM EDIT