Nokia 6288 Service Manual page 15

CMO Operations & Logistics
Training and Vendor Development
Multimedia Creation & Support
17.) Separate the LCD Module from the Display Metal Shield.
19.) (VGA Camera only RM-78): Release the VGA Camera
with the SS-51. Hold the Main Flex near the Camera Socket
while removing the camera.
21.) Shift the unit into mid position. Release the connector
of the Main Flex Assy.
23.) Lift the glued Power Switch carefully.
Service Manual 6288 RM-78/RM-268
Page 5 (24)
CONFIDENTIAL
18.) Release the Camera Guide Assy with the SRT-6.
20.) (VGA Camera only RM-78): For Assembly: Mind the cor-
rect positioning of the VGA Camera.
22.) Slot the flex connector through the C-Cover Assy care-
fully.
Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
Approved .0
MGR
26.Feb.2007