Nokia 6288 Service Manual page 14

CMO Operations & Logistics
Training and Vendor Development
Multimedia Creation & Support
9.) Protect the inner side window with a plastic film. Re-
move the Keymat as shown.
11.) Shift together the unit. Lift up the glued UI PWB Assy
carefully with the SRT-6.
13.) Carefully release the flex connector at one side first.
15.) Take away the UI PWB Assy.
Service Manual 6288 RM-78/RM-268
Page 4 (24)
CONFIDENTIAL
10.) Protect the LCD with a plastic film.
12.) Lift the UI PWB together with the LCD Module.
14.) Now release the other side of the flex connector.
16.) Release the connector of the LCD Module carefully
while fixing the flex foil. Remove the LCD Module now.
Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
Approved .0
MGR
26.Feb.2007