System Requirements; Product Setup; Windows User - D-Link DCS-2332L Quick Installation Manual

Hd wireless n outdoor cloud camera

Hide thumbs Also See for DCS-2332L:

SySTEM REQUIREMENTS

• computer with microsoft Windows

• pc with 1.3GHz or above and at least 128mB Ram

• Internet explorer 7, Firefox 12, safari 4, or chrome 20 or higher version with java installed and enabled

• existing 10/100 ethernet-based network or 802.11g/n wireless network

Step 1:

locate the antenna included with your dcs-2332l, and attach it to the antenna connector located on

the side of the dcs-2332l.

Step 2:

carefully remove the rubber seal on the back of the dcs-2332l, and use the included ethernet cable to

connect the dcs-2332l to your network.

Step 3:

attach the external power supply to the dcs-2332l and also connect it to your wall outlet or power

strip. power is confirmed when the led power Indicator is lit green.

Step 4:

Insert the dcs-2332l driver cd in the cd-Rom drive. If the cd autorun function does not

automatically start on your computer, go to start > Run. In the run box type d:\setup.exe (where d:

represents the drive letter of your cd-Rom drive) and click ok. When the autorun screen appears,

click Set up your Cloud Camera and follow the on-screen instructions.

Step 5:

after configuring your dcs-2332l, you can remove the ethernet cable and carefully reinsert the rubber

seal.

DCS-2332L

8/7/Vista/Xp, or mac with os X 10.6 or higher

Table of Contents