Mount Into The Dashboard - Philips CE138 User Manual

2
Connect the antenna and amplifier as
illustrated, if applicable.
L
REAR
R
d c b
Sockets on rear
panel
1 For ISO male
connectors
REAR L
2
3 REAR R
ANTENNA
4
Tip
•
The pin arrangement for the ISO connectors depends
on the type of your vehicle. To avoid damage to the
unit, connect properly.

Mount into the dashboard

• If the car does not have an on-board drive
or navigation computer, disconnect the
negative terminal of the car battery.
• If the car battery is not disconnected, to
avoid short-circuit, make sure that the bare
wires do not touch each other.
EN
8
a
External sockets or
connectors
As indicated above
Rear left speaker
Rear right speaker
Antenna
1
Make sure that the car dashboard opening
is within these measurements:
2
Remove the mounting sleeve with the
supplied disassembly tools.
3
Install the sleeve into the dashboard and
bend the tabs outward to fix the sleeve.
1 8
3 m
m