Additional Information; Reset The System; Replace The Fuse - Philips CE138 User Manual

10 Additional
information

Reset the system

If the system works abnormally, reset the
system to factory default settings.
1
Detach the front panel.
2
Press the RESET button with the tip of a
ball-point pen or toothpick.
» All settings are reset to factory default.

Replace the fuse

If there is no power, check the fuse and replace
it if it is damaged.
1
Check the electric connection.
2
Remove the damaged fuse from the rear
panel.
3
Insert a new fuse with the same
specifications (15 A).
L
REAR
R
Note
•
If the fuse gets damaged immediately after it is
replaced, an internal malfunction may occur. In such
case, consult your Philips retailer.
EN
21