Vax C85-ID-Be Let's Get Started page 6

Taking care of your machine
Cleaning the pre-motor filter
Press dirt container release button Remove the pre-motor filter.
and lift to remove. Separate the frame and foam.
40˚C 40˚C
!
MAX MAX
Leave to dry for 24 hours or until
Rinse both the frame and foam under
water (Max 40°C). fully dry before placing back in
the machine.
C85-ID-BePe_ImpactSeries_UG_[VAX01441]_PRINT_29.08.14.indd 10-11
Tap the filter frame and foam over
a bin to remove any dirt/debris.
24hr
TIP
Taking care of your machine
IMPORTANT: The exhaust filter is designed to offer long life with no maintenance. The filter should be checked
periodically and when heavily discoloured it should be replaced. Please do not wash, scrub or brush the filter as
this will damage the delicate filter media.
Post-motor filter maintenance
Squeeze the filter cover clips together Push tab pull to remove the
and pull to remove. post-motor filter.
Storing your vacuum cleaner
Press cord rewind button to retract Place floorhead into parking slot
cord into vacuum cleaner. on the back of vacuum cleaner for
storage and carrying.
Check the post-motor filter
for discolouration.
12/09/2014 10:24