Advertisement
Getting to know your machine
Separator and shroud
Dirt container
Hose entry
point
Pre-motor
filter (hidden)
Technical Specification
Accessories & Consumables
Name Impact
Filter (Type 118) Pre-Filter
1-1-134534-00
Voltage Please refer to product rating label
Wattage Please refer to product rating label
Filter (Type 106) Post-Filter
1-1-134390-00
Cord length 5-5.5m
TurboTool (Type 4)
Weight 4.3kg
1-1-134340-00
Tool Connector (Type 1)
1-1-133838-00
Subject to technical change without notice.
*
C85-ID-BePe_ImpactSeries_UG_[VAX01441]_PRINT_29.08.14.indd 6-7
Dirt container
release button
Carry handle
Cord rewind button
On/off button
Floorhead
parking slot
Post-motor
filter cover
Crevice Tool (Type 10)
1-9-128020-00
Combination Floor Tool (Type 6)
1-1-134330-00
Dusting Brush (Type 5)
1-9-127512-00
vax.co.uk
To purchase consumables and accessories, please visit
PLEASE READ 'LET'S TALK SAFETY' AT THE BEGINNING BEFORE USE
Before you begin cleaning
IMPORTANT: The vacuum cleaner is equipped with a thermal cut-out. If for any reason the vacuum cleaner does
overheat the thermostat will automatically turn the vacuum cleaner off. If this happens, switch the vacuum cleaner
off and unplug. Remove and empty the dirt container also check the vacuum cleaner for blockages. Allow the
vacuum cleaner to cool for approximately 1 hour (if you have cleaned the filters please wait 24 hours for the filters to
fully dry before putting back into the machine).
Clean the pre-motor filter every time the dirt container is emptied and replace the post-motor filter every 12 months.
If the vacuum cleaner is blocked, switch off and unplug before removing the blockage.
Assembling your vacuum cleaner
Insert hose grip into telescopic
Press both buttons at end of hose and
extension tube.
insert into hose entry point.
Press button on telescopic extension
Insert the other end of
tube and adjust to required length.
the telescopic tube into
the floorhead.
Getting started
12/09/2014 10:24
Advertisement
