Troubleshooting - Black & Decker GSN30 Instruction Manual

• Battery wonʼt charge.
Problem
For assistance, visit our website www.blackanddecker.com for the location of the service center nearest you or call the BLACK &
DECKER help line at 1-800-544-6986.

TROUBLESHOOTING

• Charger not plugged into a working outlet.
Possible Cause
or not plugged into shear shrubber.
• Charger plug not fully inserted into tool socket.
• Surrounding air temperature too hot or too cold.
Possible Solution
Imported by
Black & Decker (U.S.) Inc.,
701 E. Joppa Rd.
Towson, MD 21286 U.S.A.
7
•
Plug charger into a working outlet. Refer to
"Important Charging Notes" for more details.
• Check current at receptacle by plugging in a
lamp or other appliance.
• Check to see if receptacle is connected to a
light switch which turns power off when you turn
out the lights.
• Check to be sure charger plug is fully inserted
into tool charging socket.
• Move charger and tool to a surrounding air
temperature of above 40 degree F(4.5°C) or
below 105 degree F (+40.5°C).
See 'Tools-Electric'
– Yellow Pages –
for Service & Sales