Limit Leds; Signal Leds - DIGISYNTHETIC DP4800 User Manual

2)VOLTAGE PROTECTION: trips in the event of a short-circuit or
overload, limiting the output current.
3)CIRCUIT DAMAGE PROTECTION: in the events of damage, limit the
damage to extend, minish the loss.
Some protection situations require the amplifier to be switched off and
i
then back on for normal operating conditions be restored.

4. LIMIT LEDS

Amplifier £¢ status indicators: these LEDs are able indicating the
operation of the internal limiter, when inserted, or the clipping of the
amplifier. They are POST-LEVEL: in other words they display the status of

5. SIGNAL LEDs

Signal status indicators: able to indicate a signal presence in the inputs "
of the amplifier.
6. BRIDGE LEDS (only for DP1400 and DP4800)
Bridge switch with yellow indication. Pull the switch to the position
"B RIDGE , it lights up; Pull the switch to the position STEREO , it lights "
off.
"
"
" "
The bridge position:
5