Storing A Job In Memory - Panasonic DP-C406 Operating Instructions Manual

Storing a Job in Memory

A copy job can be registered as a preset job. It is useful to register the frequently used settings as
Preset Jobs.
Refer to Recalling a Preset Job Stored in Memory (see page 39).
Once registered, the copy job settings are kept in the job memory until they are overwritten by new settings.
A Proof Copy job cannot be registered in the job memory.
"M1:"/"M2:" cannot be registered when the Manual Skyshot mode is selected. Refer to Copier Settings in the
Operating Instructions (For Function Parameters) of provided CD-ROM.
1
Place original(s).
Refer to Placing Originals (See page 6).
2
Press the Copy key if the machine is
set to other function mode.
3
Select the copy features (See pages
11 to 36 and 43 to 105).
4
Enter the desired number of copies.
5
Select "Preset Jobs".
6
Select "Save", and then select a job
button without a job registered.
1 2
The job button, in which a job has been
registered, has a job name.
37