Table of Contents
Advertisement
Connecting Additional Devices to the
DI-604UP Broadband Router
Using additional Ethernet (CAT5 UTP/Straight-Through) cables, connect your
Ethernet-equipped computer(s) to one of the 3 remaining Ethernet LAN ports on
the back panel of the DI-604UP.
Each of the LAN ports on the back
of the DI-604UP have a
corresponding LED light on the front
panel of the unit. When a proper
connection has been made to a
computer that is ON, the LED on the
front panel should illuminate.
Additional printer may be added to your DI-604UP to increase functionality. By
connecting a printer to the USB port at the back of the router, you may share print
capabilities over your wired network. A valid USB connection will cause the
corresponding USB LED at the front to light. For more information regarding USB
connections and device implementation, see the DI-604UP user guide.
LAN Port LEDs.
USB Port LED.
The USB port on the back of the
DI-604UP has a corresponding LED
light on the front panel of the unit.
When a proper connection has been
made to a device that is ON, the LED
on the front panel should illuminate.
3
Advertisement
Table of Contents
