System not calibrated
If the system has not been calibrated or one or more tyres have
been replaced, the symbol and message shown in example
be displayed. Simultaneously, the specific warning light on the
instrument panel (see page 112) starts flashing, and continues to
flash for 90 seconds.
When the display cycle ends (20 seconds), the symbol and message
disappear and the screen page that was previously displayed
reappears whereas the warning light remains on until the system
has been calibrated.
The TPMS can be calibrated using the special menu item in the left
TFT display with the ignition key in position II and the engine off.
To calibrate the TPMS, call up the MENU screen page on the left
TFT display (see page 88) with the ignition key in position II and
the engine off. Once the MENU screen page appears, select the
items "Car setup", "Calibr. TPMS".
TPMS
not calibrated
Execute
calibration
14
When the Menu item is displayed and the subsequent calibration
accepted, the screen page shown in example
5 seconds.
14
will
Warning
Before calibrating the system, make sure that the tyre pressure
corresponds to the indicated pressure values (see page 30). If
this is not the case, the TPMS may issue wrong low pressure
indications.
Calibration
activated
15
Display setup
Date/Hour
Language/M.U.
Car setup
Dimming
15
appears for
2
Safety
69
Need help?
Do you have a question about the 2012 F12 Berlinetta and is the answer not in the manual?