Fault Display; Fault Visualisation Logic; “Escape” Function - Ferrari 2012 F12 Berlinetta Owner's Manual

Fault display

Fault visualisation logic

When a fault occurs, the corresponding warning light (if present)
comes on on the panel whereas a description of the fault (if
available) and the relevant symbol (if available) are displayed on
the left TFT display. The message appears on the display as soon as
the warning light (if present) comes on and the main screen page
that is displayed at that time is reduced.
The fault remains on the display for 20 seconds. When the display
cycle ends, if the fault does not have a special warning light on the
panel, the symbol remains minimised in area
page 89) until the cause of malfunctioning has been resolved. In
area the main screen page is displayed in "maximum" size.
B
Catalysts temp.
too high
Engine
performance
limited
About your Vehicle
106
When the display cycle ends, if the fault has a special warning light
on the panel, the screen page prior to the anomaly is displayed
again, and the symbol is not minimised in area D. The warning
light on the panel stays on until the cause of malfunctioning has
been resolved.
If the fault is resolved within 20 seconds, it remains displayed and
the warning light remains lit for 2 seconds.
"ESCAPE" function
Displaying a fault on the screen can be interrupted by pressing and
quickly releasing the OK button with "ESCAPE" function. When
the OK button is pressed, the screen page that was displayed prior
D of the display (see
to the event reappears. If the fault does not have a special warning
light on the panel, the symbol remains minimised in area
the cause of malfunctioning has been resolved.
D until