Operational Procedures - Mahindra e2o City Quick Reference Manual

A) Check if the vehicle door operations are working fine, lower the door window glasses using power
window switch & using key fob or button on climate control open the rear hatch.
B) Turn off the start stop button (SSB)- Check the status LED on the switch and if in 'Green' then press the
switch once to turn it off. Verify by checking the status LED on the switch if it has turned off.
ON
START
STOP
OFF
C) Open the hood, remove close out cover and isolate the power to other switched 72V systems by removal
of ignition relay 1 & 2
HOOD RELEASE LEVER

10.0 OPERATIONAL PROCEDURES

Power
window switch
Identifying 72V system is on:
1. If key switch LED is illuminated green then 72V system is
active.
2. If charge indicator on cluster is blinking then 72V system and
also 230V AC supply is active.
START
STOP
3. If HVAC is operating then 72V system is active.
Emergency exit:
To come out of car in emergency due to central door lock
failure / accident, use rear hatch glass release on tail light trim
panel by removing grommet and pulling release cable. Rear
hatch will open.
Key fob
Fuse box
Hatch
release
13