Cleaning And Maintaining The Lcd Monitor; Guarantee; Disposal - Waeco PerfectView M71L Installation And Operating Manual

_RV-71_EB_10s.book Seite 29 Freitag, 2. Februar 2007 1:21 13
PerfectView M70L
7.4 Setting the video source
➤
If you wish to switch to a different video source (from video 1 to video 2), press
the "V1/V2" button (fig. 0 5, page 6).
✓
The monitor switches from video source 1 to video source 2 and vice-versa.
8

Cleaning and maintaining the LCD monitor

Caution!
a
Do not use sharp or hard objects for cleaning as these may damage
the monitor.
Caution!
e
Remove the cable before cleaning the monitor to prevent short circuiting.
➤
Clean the monitor with a soft, damp cloth from time to time.
9

Guarantee

The statutory warranty period applies. If the product is defective, please return it to
the WAECO location in your country (see the back of the instruction manual for the
address) or to your dealer. For repair and guarantee processing, please include the
following documents when you send in the device:
A copy of the receipt with purchasing date
A reason for the claim or description of the fault
10

Disposal

➤ Place the packaging material in the appropriate recycling waste bins
wherever possible.
If you wish to finally dispose of the device, ask your local recycling centre
or specialist dealer for details about how to do this in accordance with the
applicable disposal regulations.
Cleaning and maintaining the LCD monitor
29