Icom ic-m602 Instruction Manual page 43

D D MMSI code check
The programmed 9-digit MMSI (DSC self ID) code can be
checked in DSC set mode.
q Push [MENU] to enter the DSC menu.
w Rotate [CHANNEL] to select "Set up," push [ENT].
--DSC Menu--
Select item
˘Position Request
˘Polling Request
˘Received Calls
˘Distress Setting
˘Set up
˘Exit
e Rotate [CHANNEL] to select "MMSI check," push
[ENT].
--DSC Menu--
Set up
˘Add:INDV ID
˘Add:Group ID
˘DEL:INDV ID
˘DEL:Group ID
˘Offset time
˘MMSI Check
r Check the 9-digit MMSI (DSC self ID) code.
--DSC Menu--
MMSI Check
˘123456789
<CLR˘Exit>
t Push [CLR] or [ENT] to exit the condition to DSC set up
menu.
6
DSC OPERATION
6
37