Troubleshooting - Philips HTL5120 User Manual

7 Troubleshooting
_ Warning
• RiskofeEec±ricshod<.Neverremovethecasingofthe
product,
To keep the warranty valid, never try to repair
the product yourself.
If you have problems using this product, ched<
the following points before you request service.
If you still have a problem, get support at www.
philips.com/support.
Main unit
The buttons on the SoundBar do not work.
• Disconnect the SoundBar from the power
supply for a few minutes, then reconnect.
Sound
No sound from SoundBar speakers.
• Connect the audio cable from your
SoundBar to yourTV or other devices.
However, you do not need a separate
audio connection when:
the SoundBar andTV are connected
through HDMI ARC connection, or
• a device is connected to the HDMI IN
connector on your SoundBar.
• Reset your SoundBar to its factory settings
(see 'Apply factory settings' on page 12).
• On the remote control, select the correct
audio input.
• Hake sure that the SoundBar is not muted.
Distorted sound or echo.
• If you play audio from theTV through the
SoundBar, make sure that theTV is muted.
Audio and video are not synchronized.
• Press AUDIO SYNC +/- to synchronize
the audio with the video.
Bluetooth
A device cannot connect with the SoundBar.
• The device does not support the
compatible profiles required for the
SoundBar.
You have not enabled the Bluetooth
function of the device. See the user manual
of the device on how to enable the
function.
• The device is not correctly connected.
Connect the device correctly. (see 'Play
audio through Bluetooth' on page 11)
• The SoundBar is already connected with
another Bluetooth device. Disconnect the
connected device, then try again.
Quality of audio play from a connected
Bluetooth device is poor.
• The Biuetooth reception is poor. Hove the
device closer to the SoundBar, or remove
any obstacle between the device and the
SoundBar.
The connected Btuetooth device connects and
disconnects constantly.
• The Bluetooth reception is poor. Hove the
device closer to the SoundBar, or remove
any obstacle between the device and the
SoundBar.
Turn offWi-Fi function on the Bluetooth
device to avoid interference.
For some Bluetooth, the Bluetooth
connection can be deactivated
automatically to save power.This does not
indicate any malfunction of the SoundBar.
EN 15