Table of Contents
Advertisement
If you wish to change the orientation of the star diagonal, loosen the thumbscrew on the eyepiece adapter until the star diagonal rotates
freely. Rotate the diagonal to the desired position and tighten the thumbscrew.
T
h
e
E
y
e
p
i
e
c
e
T
h
e
E
y
e
p
i
e
c
e
The eyepiece, is the optical element that magnifies the image focused by the
telescope. The eyepiece fits either directly into the focuser (114mm and
130mm models) or into the star diagonal (60, 80, or 102mm models). To
install the eyepiece:
For 60, 80, and 102mm models:
1.
Loosen the thumbscrew on the star diagonal so it does not obstruct the inner
diameter of the eyepiece end of the diagonal. Remove the protective dust cap
from the star diagonal's barrel.
2.
Slide the chrome portion of the low power 25mm eyepiece into the star
diagonal.
3.
Tighten the thumbscrew to hold the eyepiece in place.
To remove the eyepiece, loosen the thumbscrew on the star diagonal and slide
the eyepiece out.
For 114 and 130mm models:
1.
Loosen the thumb screw on the eyepiece adapter at the end of the focuser
barrel and remove the protective dust cap from the focuser barrel.
2.
Slide the chrome portion of the low power 25mm eyepiece into the eyepiece
adapter.
3.
Tighten the thumbscrew to hold the eyepiece in place.
To remove the eyepiece, loosen the thumbscrew on the eyepiece barrel and
slide the eyepiece out.
Eyepieces are commonly referred to by focal length and barrel diameter.
The focal length of each eyepiece is printed on the eyepiece barrel. The
longer the focal length (i.e., the larger the number) the lower the eyepiece
power or magnification; and the shorter the focal length (i.e., the smaller the
number) the higher the magnification. Generally, you will use low-to-
moderate power when viewing. For more information on how to determine
power, see the section on "Calculating Magnification."
Barrel diameter is the diameter of the barrel that slides into the star diagonal or focuser. The NexStar uses eyepieces with a standard
1-1/4" barrel diameter.
F
o
c
u
s
i
n
g
F
o
c
u
s
i
n
g
To focus your telescope, simply turn either of the focus knobs at the eyepiece end of the optical tube (see figures 2-6 and 2.7). Turn
the focus knob until the image is sharp. Once sharp, turn the knob towards you to focus on an object that is closer than the one you
are currently observing. Turn the knob away from you to focus on a more distant object than the one you are currently observing.
T
h
e
S
t
a
r
P
o
i
n
t
e
r
F
i
n
d
e
r
s
T
h
e
S
t
a
r
P
o
i
n
t
e
r
F
i
n
d
e
r
s
The Star Pointer is the quickest and easiest way to point your telescope exactly at a desired object in the sky. It's like having a laser
pointer that you can shine directly onto the night sky. The Star Pointer is a zero magnification pointing tool that uses a coated glass
window to superimpose the image of a small red dot onto the night sky. While keeping both eyes open when looking through the Star
Pointer, simply move your telescope until the red dot, seen through the Star Pointer, merges with the object as seen with your unaided
eye. The red dot is produced by a light-emitting diode (LED); it is not a laser beam and will not damage the glass window or your eye.
c
o
p
e
c
o
p
e
Eyepiece
Star
Diagonal
Figure 2-6 – Visual accessories for the NexStar
Star Pointer
Focuser
Figure 2-7– Visual accessories for the
9
Star Pointer
Finderscope
Focus Knob
Eyepiece Adapter
60, 80 & 102 models
Eyepiece
Eyepiece Adapter
NexStar 114 & 130
Hide quick links:
Advertisement
Table of Contents
