KitchenAid KUDD03DTSS Installation Instructions Manual page 14

4. Slide the dishwasher into position in the cabinet opening.
Check that the drain hose and electrical wiring are not kinked.
5. Check left to right level by placing the level on the top of the
drawer. Check front to back level by placing level on the slide
rails.
6. Adjust legs with a ³⁄₁₆" socket wrench to level the dishwasher.
A
A. Adjust legs.
7. Rest the trim strip on the floor and mark the trim at the top of
the frame flange height. Pick the closest groove to the mark. If
the mark is between 2 grooves, choose the groove that makes
the trim strip the shortest. On a covered surface, cut the trim
strip at the selected groove. Pull dishwasher back out of
cabinet opening about 6" (15.24 cm)
14
8. Attach the toe kick bracket to the frame.
9. Place the trim strip into the toe kick bracket.
10. Attach the toe kick bracket on the opposite side.