Make Electrical Connection - KitchenAid KUDD03DTSS Installation Instructions Manual
Drawer dishwasher
Hide thumbs
Also See for KUDD03DTSS:
- User instructions (23 pages) ,
- Specifications (1 page) ,
- Installation instructions manual (56 pages)
Table of Contents
Advertisement
Available languages
Available languages
Option 3: Waste Disposer and Drain Air Gap
A
B
C
A. Drain air gap
B. Drain hose connector
C. Waste
Option 4: No Waste Disposer, No Drain Air Gap
A
B
A. Drain hose connector
B. Waste
NOTES:
Attach the drain hose connector to the water waste line
using the supplied hose clamp.
This connection must be before the drain trap and at least
20" (50.8 cm) above the floor where the dishwasher will be
installed. It is recommended that the drain hose be looped
up and securely fastened to the underside of the counter.
6. Turn on water and check for leaks.
Make Electrical Connection
WARNING
Electrical Shock Hazard
Disconnect electrical power at the fuse box or circuit
breaker box before installing dishwasher.
Failure to do so can result in death or electrical shock.
1. Remove screw securing the electrical box cover. Remove
cover.
2. Route electrical wires through strain relief and secure to
electrical plate.
Page 12
Hide quick links:
Advertisement
Table of Contents
