Philips 220BL2CB/00 Service Manual page 17

Electrical characteristics
1 Interface signals
1.1 D-Sub Analog
Input signal: Video, Hsync., Vsync
Video: 0.7 Vp-p, input impedance, 75 ohm @DC
Sync.: Separate sync TTL level , input impedance
2.2k ohm terminate
Hsync Positive/Negative
Vsync Positive/Negative
Composite sync TTL level, input impedance 2.2k ohm
terminate (Positive/Negative)
Sync on green video 0.3 Vp-p Negative (Video 0.7
Vp-p Positive)
1.2 DVI-D Digital
Input signal: Single TMDS link (Three channels:
RX0-/+, RX1-/+, RX2-/+)
1.3 Audio (waiting for supplier input)
Input signal: 1000 mVrms
Loudspeaker (Impedance: 5.25 Ohm +/-15%):
1.5W+1.5W stereo for RMS Power
Frequency range: 450Hz - 20KHz
Headphone connection will mute speakers
1.4 USB PLUG
USB port (1 upstream, 1 downstream)
2 Interface
2.1 D-Sub Cable
Length
Fix with monitor when packing, with transplant pin
protective cover.
Connector type
assignments.
Blue connector thumb-operated jack screws
2.2 DVI Cable
The input signals are applied to the display through
DVI-D cable.
Length
Connector type
assignments
White connector thumb-operated jackscrews
With transplant pin protective cover.
2.3 Audio Cable
Length
Connector type
both end heads.
Sliver & Black model: Black heads and cable.
T color model: Green heads and white cable.
3 Timing requirement
3.1 Factory Preset mode definition:
3.1.1 Perfect FOS while presenting those timings.
3.1.2 Will specify those timing in User's Manual
3.2 Preset mode definition:
3.2.1 Need to support those timings.
3.2.2 Perfect FOS after auto adjustment.
3.3 User mode
3.3.1 Can save those timing that not in Preset mode
and can be showed (not over scalar or Panel spec.)
3.3.2 It needs to reserve the 10 timings space in
memory size.
: 1.8 M +/- 50 mm
: D-Sub male with DDC2B pin
: 1.8 M +/- 50 mm
: DVI-D male with DDC-2B pin
: 1.8 M +/- 50 mm
: 3.5-mini jack with color on the
3.3.3 Factory preset modes (18 modes)
Factory modes and preset modes are defined in the
enclosed timing table file
M2 20W and 22W Mode Table
Item H.Freq. Mode Resolution V.Freq.
(KHz) (Hz)
1 31.469 IBM VGA 10H 640x350 70.086
2 31.469 IBM VGA 3H 720x400 70.087
3 31.469 IBM VGA 12H 640x480 59.94
4 35 MACINTOSH 640x480 67
5 37.861 VESA 640x480 72.809
6 37.5 VESA 640x480 75
7 35.156 VESA 800x600 56.25
8 37.879 VESA 800x600 60.317
9 48.077 VESA 800x600 72.188
10 46.875 VESA 800x600 75
11 49.7 MACINTOSH 832x624 75
12 44.75 - 960x720 60
13 56.4 - 960x720 75
14 48.363 VESA 1024x768 60.004
15 56.476 VESA 1024x768 70.069
16 60.023 VESA 1024x768 75.029
17 61.1 IBM XGA-2 1024x768 76.09
18 47.776 CVT 2.3MA 1280 x768 59.87
19 60.289 CVT 2.3MA 1280 x768 74.893
20 53.986 1152x864 59.985
21 63.851 1152x864 70.012
22 67.5 VESA 1152x864 75
23 68.681 MACINTOSH 1152x870 74.98
24 61.846 SUN WS 1152x900 66.004
25 71.809 SUN WS 1152x900 76.149
26 60 VESA 1280x960 60
27 75.171 VESA 1280x960 75.021
28 63.981 VESA 1280x1024 60.02
29 71.691 SUN WS 1280x1024 67.189
30 76.02 DOS/V 1280x1024 71.448
31 79.976 VESA 1280x1024 75.025
32 81.135 SUN WS 1280x1024 76.111
33 44.772 VESA 1280x720 59.885
34 52.5 VESA 1280x720 70
35 65.317 CVT 1400x1050 59.978
36 82.278 CVT 1400x1050 74.867
VESA-reduced
37 55.469 1440x900 59.901
blanking mode
38 55.935 VESA 1440x900 59.887
39 70.635 VESA 1440x900 74.984
40 75 VESA 1600x1200 60
41 66.587 CVT 2.3MA-R 1920x1080 60
42 65.29 CVT1.76MW 1680x1050 59.954
43 64.674 CVT1.76MW-R 1680x1050 59.883
44 49.702 CVT 1.02 1280x800 59.81
45 82.306 CVT1.76MW 1680x1050 74.892
220BL2 LCD 17
BW(MHz) Remark
25.175 can't put it in EDID, change to preset mode
28.322
25.175
30.24
31.5
31.5
36
40
50
49.5
57.28
960x720 and 1280x720 information are
57.58 same, need to do AUTO to separate them.
Default timing is 1280x720
960x720 and 1280x720 information are
72.42 same, need to do AUTO to separate them.
Default timing is 1280x720
65
1280x768 and 1360x768 information are
75 same, need to do AUTO to separate them.
Default timing is 1280x768
1280x768 and 1360x768 information are
78.75 same, need to do AUTO to separate them.
Default timing is 1280x768
1280x768 and 1360x768 information are
83.096 same, need to do AUTO to separate them.
Default timing is 1280x768
1280x768 and 1360x768 information are
79.5 same, need to do AUTO to separate them.
Default timing is 1280x768
1280x768 and 1360x768 information are
102.25 same, need to do AUTO to separate them.
Default timing is 1280x768
79.9
94.499
108
100.001
94.5
108
108
129.806
108
116.999
130.223
135
135.008
960x720 and 1280x720 information are
74.5 same, need to do AUTO to separate them.
Default timing is 1280x720
960x720 and 1280x720 information are
89.04 same, need to do AUTO to separate them.
Default timing is 1280x720
121.75
156.001
88.75
106.5
136.75
161
2006/08/22, Joshua/Paul> Not put into EDID,
some DELL N/B will use it as power on
138.5
default timing,
it cause display fails
1680x1050 and 1440x1050 information are
146.25 same, need to do AUTO to separate them
Default timing is 1680x1050
1680x1050 and 1440x1050 information are
119 same, need to do AUTO to separate them
Default timing is 1680x1050
83.5
187 Just for D-sub
Factory
Preset
mode: 17
Sets
Preset
mode: 45
Sets
User
mode: 10
Sets