Factory Settings (Normset) - Blaupunkt brisbane sd48 Operating And Installation Instructions

Factory settings
Factory settings
(NORMSET)
You can reset the device to the factory set-
tings.
Notes:
• Your personal settings are deleted
during reset (Normset).
• The setting "CDC ON" or "CDC OFF" is
not changed by the reset.
Press the MENU button >.
u
The display shows "MENU".
Press the or
u
edly until "NORMSET" appears on the
display.
To reset the device to the factory settings,
press the MENU button > for longer
u
than 4 seconds.
"NORM ON" appears on the display and the
device is reset.
Note:
If you press the MENU button > for
less than 4 seconds, the device is not re-
set and the display shows "NORM OFF".
Your settings are retained.
34
button 2 repeat-
Factory settings:
Power-on volume (ON VOL) 20
Volume of muting
(MUTE LEVEL)
Volume of telephone/
navigation announcement
(TEL VOL)
Seek tuning sensitivity
(SENS)
Scan time (SCAN TIME)
Time display (CLOCK)
Time (CLOCK SET)
Time display mode
(CLOCK MODE)
Confi rmation beep (BEEP)
Display brightness
0
10
HI
10
OFF
12:00
12H
ON
DAY 15,
NIGHT 12