Audio Components - Pioneer VSX-709RDS Service Manual

QQ
3 7 63 1515 0

Audio Components

To begin set up connect your audio components to the jacks as shown below. These are all analog connections and your analog audio
components (cassette deck etc.) use these jacks. Remember that for components you want to record with you need to hook up four
plugs (a set of stereo ins and a set of stereo outs), but for components that only play you only need to hook up one set of stereo plugs
(two plugs). To use Digital sources features you must hook up your digital components to the digital inputs, but it is also a good idea to
hook up your digital components to analog audio jacks. If you want to record to/from digital components (like an MD) to/from analog
components you must hook up your digital equipment with these analog connections.
• Only the VSX-709RDS has S-video jacks and optical digital out jack.
• The arrows indicate the direction of the audio signal.
TE
L 13942296513
OUTPUT
L
R
CD player
7 Audio cords
Use audio cords (not supplied) to connect the audio components.
www
Cassette deck placement
Cassette deck placement
.
Depending on where the cassette deck is placed, noise may occur during playback of your cassette deck which is caused by leakage
flux from the transformer in the receiver. If you experience noise, move the cassette deck farther away from the receiver.
http://www.xiaoyu163.com
x ao u163
y
i
http://www.xiaoyu163.com
VSX-709RDS, VSX-609RDS
2 9
8
Q Q
3 6 7 1 3 1 5
REC PLAY
L
R
CD-R
or Cassette deck
or MD recorder
Connect red plugs to R (right) and white plugs to L (left).
Be sure to insert completely.
co
.
9 4 2 8
VSX-709RDS
0 5 8 2 9 9 4 2 8
m
9 9
9 9
63