Crown DSi 1000 Operation Manual page 27

DSi Series Power Amplifiers
Set amplifier to BRIDGE-MONO mode by loading the Quick-Start BRIDGE preset
Set STEREO or BRIDGE-MONO mode manually
Set up a crossover by loading the Quick-Start XOVER preset*
Drive subwoofers in bridge-mono mode by loading the BRG SUBS preset
Select a user preset
Set INPUT Y mode
Turn EQ on or off for Ch. 1 or Ch. 2
Set DELAY for Ch. 1 or Ch. 2
Set LIMITING for Ch. 1 or Ch. 2
Turn off all the DSP
Configure a USER PRESET or modify a FACTORY PRESET
* When you call up the XOV process, Ch.1 will always be set to low frequencies and Ch. 2
will always be set to high frequencies. DO NOT connect high-frequency drivers to Ch. 1.
Operation Manual Mode d'emploi
Amplificateurs de puissance
HOW TO ACCESS PRESETS AND DSP PROCESSES
DESIRED FUNCTION
Bedienungsanleitung
Leistungsendstufen Amplificadores de potencia
(starting from the current preset screen)
Sel > Sel. Press Next until you see BRIDGE. Press Sel.
Sel > Next. Press Sel until the BRG icon flashes. Press Next to set the amplifier to Bridge-
Mono, or press Prev to set the amplifier to Stereo. Press Sel to select your choice.
Sel > Sel. Press Next until you see XOVER. Press Sel.
Sel > Sel. Press Next until you see BRG SUBS. Press Sel.
Sel > Sel. Press Next until you see PRESET 1, 2, 3, etc. Press Sel.
Sel > Next > Sel. The Y icon flashes. Press Next to see the three options.
Choose one by pressing Sel.
Sel > Next. Press Sel until the EQ icon flashes along with CH1 or CH2.
Press Next to turn EQ on or off. Press Sel.
Sel > Next. Press Sel until the DEL icon flashes along with CH1 or CH2.
Press Next until you see the amount of delay you want, then press Sel to select it.
Sel > Next. Press Sel until the LIM icon flashes along with CH1 or CH2.
Press Next until you see the limiting threshold you want, then press Sel to select it.
Sel > Sel. Press Next until you see DSP OFF. Press Sel.
1. Sel > Sel .
2. Press Next until you see the desired preset. Press Sel to select it.
3. Sel > Next.
4. Press Sel until you see the DSP process you want to apply to that preset.
5. Press Next to see the processing options, then press Sel to select an option.
6. Repeat Steps 1–5 for all the processes you wish to apply to that preset. The CUSTOM ICON
will light if a factory preset has been modified.
Manual de Operación
BUTTON PRESSES
page 27