3Com 4500 Quick Reference Manual page 13

Table 10 FTP Client View
<4500>ftp xxx.xxx.xxx.xxx
(where xxx.xxx.xxx.xxx is the IP address of the FTP server)
Command
ascii
binary
bye
cd
cdup
close
debugging
delete
dir
disconnect
get
lcd
ls
mkdir
open
passive
put
pwd
quit
remotehelp
rmdir
user
verbose
Table 11 RADIUS Server Group View
[4500]radius scheme 1
Command
accounting optional
data-flow-format
key
nas-ip
primary accounting
primary authentication
retry
retry realtime-accounting
Description
Configure FTP data transmission mode as ASCII mode
Configure FTP data transmission mode as binary mode
Disconnect with the remote FTP Server and return to user
view
Change the working path on the remote FTP server
change working path on the FTP server to the next level up in
the directory structure
Terminate the control connection and data connection with
the FTP Server and remain in FTP client view
Enable the system debugging functions
Delete a file on the FTP server
Query a file or display the contents of current working
directory
Disconnect FTP client side from FTP server side without exiting
FTP client view
Download a remote file and save it locally
View local working path of FTP client
Query a file or display the contents of current working
directory
Create a directory on the FTP server
Open FTP connection
Configure the data transmission mode as passive mode
(passive mode is the default data transmission mode)
Upload a local file to the FTP server
View the current directory on the FTP server
Terminate the connection with the FTP server and return to
user view
View help text about FTP commands
Delete a specified directory from the FTP server
Register an FTP user
Enable verbose (verbose is enabled by default)
Description
Enable the selection of RADIUS accounting option
Configure the unit of data flow that send to RADIUS Server
Configure encryption key for RADIUS authentication/
authorization or accounting packet
Set the source IP address of the network access server (NAS,
i.e: the Switch), so that all packets destined for the RADIUS
server carry the same source IP address
Configure the IP address and port number for the primary
accounting server
Configure the IP address and port number for the primary
RADIUS authentication/authorization
Configure retransmission times of RADIUS request packet
Configure the maximum times of real-time accounting
request failing to be responded
13
Web Command
Web Command
Security -> RADIUS Client