LG GC-181SA User Manual page 7

Installation
Next
8
Adjusting Leveling Screws
• To avoid vibrations the refrigerator has to be placed on
a leveled surface.
• If necessary, set the leveling screws to compensate the
unevenness of the floor. The front should be slightly
higher than the rear so that the door can close more
easily.
• The Leveling Screws can be adjusted by tilting the
refrigerator slightly.
• Turning the Leveling Screw clockwise, the refrigerator
is raised.
• Clean your refrigerator thoroughly and wipe off all dust
accumulated during transit.
• Install accessories such as ice tray, shelf, etc., in their
proper places. They are packed together to prevent
possible damage during transit
• Connect the power supply cord to the AC outlet.
Don't double up with other appliances on the same
outlet.
• Prior to use, leave your refrigerator on for 2 or 3 hours.
Check the flow of cold air on the evaporator to ensure
proper cooling.