Wps (Wi-Fi Protected Setup) - 4gon ECB9500 User Manual

Multi-Function Gigabit Wireless-N Client Bridge Version 2.0
Check on the Enable Wireless MAC Filtering
Type in Description as a note for your own reference
Enter the MAC address that you allow for accessing to your device
Press Add to apply the policy
Click Apply for the setting to take effect

3.2.4.2.6 WPS (Wi-Fi Protected Setup)

Click on the WPS link under the Wireless drop-down menu
WPS requires you to enter a PIN for the device press the configuration button on the
device. If the device supports Wi-Fi Protected Setup and has a configuration button,
you can add it to the network by pressing the configuration button on the device
There are several ways to add a wireless device to your network. Access to the
wireless network is controlled by a registrar. A registrar only allows devices onto the
wireless network if you have entered the PIN, or pressed a special Wi-Fi Protected
Setup button on the device. The device acts as a registrar for the network, although
other devices may act as a registrar as well.
Wi-Fi Protected Setup is a feature that locks the wireless security settings and
prevents the settings from being changed by any new external registrar using its PIN.
Devices can still be added to the wireless network using Wi-Fi Protected Setup.
27
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299