Table of Contents
Advertisement
Multi-Function Gigabit Wireless-N Client Bridge
•
Radio: Choose to Enable or Disable the wireless radio.
•
Mode
•
Band: Select the IEEE 802.11 mode from the drop-down list. For example, if you are
sure that the wireless network will be using only IEEE 802.11g clients, then it is
recommended to select 802.11g only instead of 2.4 GHz B+G which will reduce the
performance of the wireless network. You may also select 802.11B+G+N. If all of the
wireless devices you want to connect with this router can connect in the same
transmission mode, you can improve performance slightly by choosing the
appropriate "Only" mode. If you have some devices that use a different transmission
mode, choose the appropriate "Mixed" mode.
•
ESSID#
configure from the drop-down list.
ESSID: The SSID is a unique named shared amongst all the points of the wireless
network. The SSID must be identical on all points of the wireless network and cannot
exceed 32 characters.
Auto Channel: The device can automatically select the clearest channel in the
environment. If auto channel is disabled, then you must select a channel from the
drop-down list.
Channel: Select a channel from the drop-down list. The channels available are
based on the country's regulation. A wireless network uses specific channels in the
wireless spectrum to handle communication between clients. Some channels in your
area may have interference from other electronic devices. Choose the clearest
channel to help optimize the performance and coverage of your wireless network.
Click on the Apply button to save the changes.
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
: This drop-down list is fixed to AP as this is the Access Point operating mode.
: This device allows up for four SSIDs, select the SSID# that you would like to
Version 2.0
19
Advertisement
Table of Contents
