Technical Specifications; Technical Specifications; Troubleshooting - Clatronic MWG 775 H Instruction Manual

Hide thumbs Also See for MWG 775 H:

Instruction manual (102 pages)

Instruction manual (102 pages)

100

101

102

103

104

105

106

Table of Contents

Available languages

Enlarged version

• Use a damp cloth to wipe the viewing window inside and

outside, and regularly remove splashing and spots caused by

spilled liquids.

Exterior

• Clean the exterior walls of the enclosure with a damp cloth only.

Make sure no water enters the openings in the enclosure and

therefore the inside of the device.

• Use a damp cloth to clean the switches. When cleaning the

function switches, first open the door in order to avoid acciden-

tally switching on the device.

Accessories

• Clean the glass tray occasionally with dish detergent or in the

dishwasher.

• Regularly clean the guide ring and the inside of the bottom. You

may remove the guide ring and manually clean it. Use a mild

detergent or glass cleaner. Dry thoroughly. Make sure to position

the ring properly afterwards.

Odor

• In order to remove unpleasant odor in the microwave, place

a bowl suitable for microwave use filled with water and lemon

juice in the device and heat for approx. 5 minutes. Then wipe the

oven with a soft cloth.

Oven lights

• Please contact a service center for replacing the oven lights.

Troubleshooting

Malfunctions are often just caused due to minor problems. Before

contacting our customer service, please check the table below:

Problem

Possible cause

Radio or TV

The electromagnetic

reception is

fields of this device

interrupted dur-

might interfere with the

ing microwave

pictures and sound of

operation.

special frequencies.

The device is

Defect wall socket.

not supplied with

electricity; the

display is black.

The display

There was a power

shows "0:00"

failure.

The device does

The door is not prop-

not start opera-

erly closed.

tion. The display

shows a readout

The START/+30SEC./

other than the

CONFIRM button

current time.

was not pressed after

selecting the function.

All controls are

locked.

The turn-

table causes a

scratching or

abradant noise.

The operation is

terminated with-

out any obvious

reason.

Model:. ..............................................................................MWG 775 H

Power supply: ..................................................................230 V, 50 Hz

Power consumption:

Microwave: ............................................................................... 1300 W

Grill: .......................................................................................... 1200 W

Convection: .............................................................................. 1200 W

Rated microwave power output: .............................. 800W/2450 MHz

Cooking chamber capacity: ................................................... 23 liters

Protection class: ................................................................................. I

Net weight: ...............................................................................14.5 kg

This device complies with all current CE directives, such as elec-

tromagnetic compatibility and low voltage directive and is manufac-

Notes/ solution

tured according to the latest safety regulations.

This is normal and not

a malfunction. Position

the devices further away

from each other.

Try another wall

socket.

Check the main fuse in

Take care of our environment, do not dispose of electrical appli-

your household.

cances via the household waste.

Set the clock again.

Dispose of obsolete or defective electrical appliances via municipal

Check if there are

collection points.

objects or food remains

jammed in the door.

Please help to avoid potential environmental and health impacts

Press the

through improper waste disposal.

START/+30SEC./

CONFIRM button,

You contribute to recycling and other forms of utilization of old

or press the STOP/

electric and electronic appliances.

CLEAR-CLOCK button

to terminate the process.

Your municipality provides you with information about collecting

points.

Problem

Possible cause

The child-proof lock is

activated.

There are dirt or

foreign objects in the

area of the turntable

shaft.

The device is defect.