CAUTION:
•
Do not use any wire brush or other abrasive objects.
•
Do not use any acidic or abrasive detergents.
•
Do not use a metal scraper to clean the viewing window.
The surface could be scratched and the glass could possibly
break.
Interior
•
Keep the interior of the oven clean. Splashes and overflowing
liquids on the walls of the oven can be removed with a damp
cloth. If the oven is very dirty a mild detergent can also be
used. Please do not use any abrasive detergents.
•
Wipe off the viewing window on the inside and outside with a
damp cloth and remove splashes and stains from overflowing
liquids regularly.
External Walls
•
The external walls of the microwave should only be cleaned
with a damp cloth. Please ensure that no water enters the
openings in the housing and therefore inside the device.
•
The switches should also only be cleaned with a damp cloth.
In order to clean the function switch, first open the microwave
door to avoid switching on the device so accidentally.
Accessories
•
The glass plate should occasionally be cleaned with washing-
up liquid or in the dishwasher.
•
The rotating ring and the inside floor of the oven should be
cleaned regularly. The rotating ring can be removed and
cleaned by hand. You may use a mild detergent or window
cleaner for this. Please dry thoroughly afterwards. Ensure that
the ring is put back in the correct position afterwards.
Odours
•
In order to remove any unpleasant odours that may emanate
from the microwave, place a dish filled with water and lemon
juice that is suitable for microwave use in the oven and heat
it for approximately 5 minutes. Then wipe out the oven with a
soft cloth.
Oven light
•
If you need to replace the lighting in the oven, please contact
a specialist workshop near you.
Troubleshooting
Malfunctions are often just caused due to minor problems. Before
contacting our customer service, please check the table below:
Fault
Possible Cause
Radio or TV
The electromagnetic
reception is
fields of this device
interrupted dur-
might interfere with
ing microwave
the pictures and
operation.
sound of special
frequencies.
48
Model: ...........................................................................MWG 778 U
Power supply: ............................................................230 V~, 50 Hz
Power consumption:
Rated microwave power output: ..........................800 W/2450 MHz
Cavity volume: ...................................................................... 20 Liter
Protection class: ...............................................................................Ι
Net weight: .................................................... ...................... 12.5 kg
The right to make technical and design modifications in the
course of continuous product development remains reserved.
This device has been tested according to all relevant current CE
Notes/ Remedy
guidelines, such as electromagnetic compatibility and low volt-
This is normal and not
age directives, and has been constructed in accordance with the
a malfunction. Posi-
latest safety regulations.
tion the devices further
away from each other.
Fault
Possible Cause
The device is
Faulty mains socket •
not supplied with
electricity.
The display
There was a power
shows "0:00"
failure.
The device does
The door is not
not start opera-
properly closed
tion. The display
shows a readout
The QUICK START/
other than the
START button was
current time.
not pressed after
selecting the func-
tion.
All controls are
The child-proof lock
locked
is activated.
The time and "clock"
symbol are shown in
the display.
The turntable
There are dirt or
causes a scratch-
foreign objects in the
ing or abradant
area of the turntable
noise.
shaft.
The operation is
The device is bro-
terminated with-
ken.
out any obvious
reason.
Technical Data
microwave: ...............................................................1250 W
grill: ............................................................................1000 W
Notes/ Remedy
Try another socket.
•
Check the house
fuse.
Set the clock again.
Check if there are
objects or food remains
jammed in the door.
Press the QUICK
START/START button,
or press the CANCEL/
STOP button to cancel
the function.
Press and hold the
CANCEL/STOP button
for more than 3 sec-
onds to unlock.
The time-delay function
is activated. Press the
CLOCK/PRE-SET but-
ton to display the start
time. Press CANCEL/
STOP button to termi-
nate the function.
Remove possible ob-
jects and food remains
as described under
"Cleaning".
Please contact our
service department.
..