Usb Playback - Sony CDX-GT627UV Operating Instructions Manual

The sound skips.
 Installation is not correct.
– Install the unit at an angle of less than 45° in
a sturdy part of the car.
 Defective or dirty disc.

USB playback

You cannot play back items via a USB hub.
 This unit cannot recognize USB devices via a
USB hub.
Cannot play back items.
 A USB device does not work.
– Connect it again.
A USB device takes longer to play back.
 The USB device contains files with a
complicated tree structure.
The sound is intermittent.
 The sound may be intermittent at a high-bit-
rate of more than 320 kbps.
Application name is mismatched with the
actual application in App Remote.
 Launch the application again from the "App
Remote" application.
Error displays/Messages
CHECKING
 The unit is confirming the connection of a
USB device.
– Wait until confirming the connection is
finished.
ERROR
 The disc is dirty or inserted upside down.
– Clean or insert the disc correctly.
 A blank disc has been inserted.
 The disc cannot play due to a problem.
– Insert another disc.
 USB device was not automatically recognized.
– Connect it again.
 Press  to remove the disc.
FAILURE
 The connection of speakers/amplifiers is
incorrect.
– See the installation/connections manual of
this model to check the connection.
HUB NO SUPRT (Hubs Not Supported)
 USB hub is not supported on this unit.
NO DEV (No Device)
 "USB" is selected as source without a USB
device connected. A USB device or a USB cable
has been disconnected during playback.
– Be sure to connect a USB device and USB
cable.
NO DISC
 The disc is ejected, or "CD" is selected as the
source without inserting the disc.
NO MUSIC
 The disc or USB device does not contain a
music file.
– Insert a music CD in this unit.
– Connect a USB device with a music file in it.
NO NAME
 A disc/album/artist/track name is not written
in the track.
NOT FOUND
 There is no item beginning with the selected
letter in Alphabet search.
OFFSET
 There may be an internal malfunction.
– Check the connection. If the error indication
remains on in the display, consult your
nearest Sony dealer.
OVERLOAD
 USB device is overloaded.
– Disconnect the USB device, then change the
source by pressing .
– Indicates that the USB device is out of order,
or an unsupported device is connected.
PUSH EJT (Push Eject)
 The disc cannot be ejected.
– Press  (eject) (page 6).
29