Philips 190CW9FB/69 Service Manual page 66

66 190CW9 LCD
C. Entertainment
i. Purpose: Design for video application, Like Microsoft Media Player or
ii. Enhancement Point:
D. Economy
i. Purpose: Adjust brightness level for reducing power consumptions
ii. No optimization by Smart Image.
iii. Design:
E. Off
i. Purpose: No optimization by SmartImage.
ii. Design:
General Product Specification
4. Brightness level sets to maximum.
5. Smart Response set to "Off".
6. Smart Contrast set to "Off".
Real Player. The screen is dominated by video.
1. Dynamic contrast enhancement by histogram analysis (DLC)
should be implemented.
2. Sharpness enhanced 90%.
3. Color enhancement set as the same with Video.
4. Color temperature set to7500K.
5. Brightness level sets to maximum.
6. SmartResponse set to "On High"
7. Gamma Table turn off to achieve fastest response time.
8. Smart Contrast set to "On"
1. Brightness level set to 70%75%, a little higher brightness level
than laptop PC, fine tune brightness level before DVT exit.
2. Color temperature set to original
3. Gamma Table is turn on to reduce bad color tracking.
1. This will follow user OSD setting. If any change by user, it will be
saved. When switch back from other SmartImage profiles, it will go
back to last saved setting.
2. Gamma Table is turn on to reduce bad color tracking.