12
190CW9 LCD
Take off the Tape AL*4
Unlock the LVDS-FFC by using two hands(see
note).
The locking-latch of
LVDS cable's housing
Disassemble the hexangular screws*4
))&
Turn over the Main-BKT.
Disassemble the I/F board
3 screws
Take up the SHD come from this
two rib of the BZL.
Mechanical Instructions
Uplift the I/F. Pull out the cable of Power board in I/F
Board. Take the I/F Board from Main-BKT and then
put it on the cushion
Disassemble the AC-Socket from the P/B and The
main-BKT. Disassemble the I/F board
and then put it on the cushion
Take off the tape below of the LED/B FFC.
Take off the BZL of from the panel .
Take off the mylar-AL from the panel.
4 screws Take the Power Board from Main-BKT
Let the wire walk
out from the rib