Optional Wooden Surround (Ws) - New Buck Corporation 42ZCBB User Manual

INSTALLATION INSTRUCTIONS FOR MODEL 42ZCBB OPTIONAL
WOODEN SURROUND (WS) (KIT# PAKDM42ZCBB)
CLEARANCES:
1. Sidewall Clearances:
combustible wall should not be less than 7". See Figure 4
2. Ceiling Clearances: The ceiling height should not be less than 42" from the top of the firebox
opening.
ASSEMBLY INSTRUCTIONS:
Tools Needed: Medium Phillips Screwdriver
Step 1: Lay out all components. (See diagram 1)
Step 2: Assemble end panels (A & B) to top front rail ( C ).
Step 3: Stand end panels and top front rail onto base (hearth) and fasten down with screws provided
(See diagram 1).
NOTE: Position back of end panels with back of base (hearth) centering assembly from each end. In-
stall front screws first, then pull back towards the inside to square the surround up. Install screws
through back holes.
Step 4: Place top onto surround, flush with back and equal on each end. Secure both ends and middle
with screws provided.
Clearances from the side of the firebox opening to any adjacent
11
CONTINUED