Specifications; Pin Assignments, Male Xlr Balanced Analog Output; Pin Assignments, Female Xlr Digital Input - PROCEED PDP 3 User Manual

Pin assignments, male XLR
balanced analog output
Pin assignments, female
XLR digital input
12

Specifications

Frequency response:
Total harmonic distortion (THD):
Dynamic range:
Signal-to-noise ratio:
Channel separation:
Intermodulation distortion (SMPTE IMD):
Digital-to-analog conversion:
Filtering:
Low-level linearity:
Output impedance:
Mains voltage:
Mains frequency:
Power consumption:
Shipping weight:
Overall dimensions
Width:
Height:
Depth:
Madrigal Audio Laboratories, Inc., reserves the right to change this
product's features and specifications without notice.
Pin 1: Chassis ground
Pin 2: Signal + (non-inverted)
1 2
Pin 3: Signal – (inverted)
3
Pin 1: Digital ground
PUSH
Pin 2: DAS (Digital Audio Standard) input +
2 1
Pin 3: DAS input –
3
10 Hz - 20 kHz +0dB, -0.2dB
0.004% @ 1 kHz, 0dB
Two precision 20-bit DACs
8x oversampling digital filter
Analog filter, linear phase to 40 kHz
Deviation unmeasurable to below -70dB,
approximately +1.0dB below -90dB
(undithered, ref 0dB @ 1kHz)
104dB (or better)
107dB
120dB
0.008%
<1Ω
120 V U.S. service
50/60 Hz
25W @ 120V, 60 Hz
22 lbs/9.98 kg
8.4 in/214 mm
3.4 in/87 mm
15.625 in/397 mm