Zero-Clearance Installation - New Buck Corporation 20 Room Heater Installation And Operation Manual

SECTION V
This room heater is listed by Warnock-Hersey Laboratories for installation into the following Zero-Clearance
Cabinet Models. These are:
MAJESTIC—M-36, M-43, L-36, L-42, MD36, MD42, MD36-AO, MD42-AO
HEATILATOR—FP36, 3036, 3042, 3048, 3138, 3138 EP
PREWAY—DW36, DW42, BI36, BI42, BI36B, BI42B, BI36EM, BI42EM, BI36CEM, BR42CEM,
BI36SEM, BI42SEM
NOTE: A Preway unit has to use insert trim panels.
Other models of those brands may also be acceptable for installation of the Model 20 unit into them. However,
factory approval from New Buck Corporation and Warnock-Hersey Laboratories is required prior to installation.
Installation must conform to New Buck Corporation installation instructions or addendums.
INSTALLATION PREPARATION
Pre-Fab Fireplace
1. Locate furniture and other materials away from the front of the fireplace to allow free access to the fireplace.
2. Cover the hearth and adjacent floor areas with the drop cloth to protect from soiling or marring the surface.
3. Remove the existing fireplace damper plate/damper rod assembly.
PRE-FAB INSERT INSTALLATION
INSTALLATION PRECAUTIONS
INSTALLATION
FIGURE 1
MINIMUM CLEARANCES
(Pre-Fab Fireplace Insert)
PRE-FAB FIREPLACE INSERT