Rs-232 Parameter Defaults - Symbol LS1203 Product Reference Manual

RS-232 Parameter Defaults

Table 6-1 lists the defaults for RS-232 host parameters. If any option needs to be changed, scan the appropriate
bar code(s) provided in the Parameter Descriptions section beginning on
NOTE See
default parameters.
RS-232 Defaults
Table 6-1
RS-232 Host Parameters
RS-232 Host Types
Baud Rate
Parity Type
Stop Bit Select
Data Bits (ASCII Format)
Check Receive Errors
Hardware Handshaking
Software Handshaking
Host Serial Response Time-out
RTS Line State
Beep on <BEL>
Intercharacter Delay
Nixdorf Beep/LED Options
Ignore Unknown Characters
Appendix A, Standard Defaults
Parameter
page
for all user preferences, hosts, symbologies, and miscellaneous
Default Page Number
Standard 6-6
9600 6-7
None 6-8
1 Stop Bit 6-9
8-Bit 6-9
Enable 6-10
None 6-10
None 6-12
2 Sec 6-13
Low RTS 6-14
Disable 6-14
0 msec 6-15
Normal Operation 6-16
Send Bar Code 6-16
RS-232 Interface
6-4.
6 - 3