Important Unpacking Instructions - Cuisinart fp-12dc Instruction Booklet

IMPORTANT UNPACKING
INSTRUCTIONS
This package contains a Cuisinart Elite
®
Collection 12-Cup Food Processor and the
accessories for it:
12- and 4-cup work bowls, work bowl cover,
large and small metal chopping/mixing blades,
dough blade, adjustable slicing disc, reversible
shredding disc, stem adapter, large and small
pushers, spatula, accessory storage case,
cleaning tool and instruction/recipe book.
CAUTION: THE CUTTING TOOLS HAVE VERY
SHARP EDGES. To avoid injury when
unpacking the parts, please follow these
instructions.
1. Place the box on a low table or on the
floor next to the kitchen counter where
you intend to keep the food processor.
Be sure the box is right side up.
2. Open top flaps—there will be a rectangular
block of foam that holds the processor
parts, each fitted into a cavity in the foam.
3. Remove the instruction/recipe book,
cleaning tool and bowl cover (A) from one
side of the foam block. Lift out the large and
small pushers from their space under the
bowl cover in the foam block.
4. Lift out the 12- and 4-cup work bowls (B)
and spatula (C) from the other side of the
foam block.
5. Lift out the foam block and the cardboard
frame.
6. Remove the housing base (D) from one side
of the bottom of the box. Assemble the
work bowls on the base by placing them
over the shaft and using the handle to turn
the work bowl counterclockwise to lock it.
7. Place the food processor on the countertop
or table. Read the Assembly and Operating
Instructions thoroughly before using the
machine.
8. The storage case (E) is on the other side of
the bottom of the box.
9. Lift out the storage case, unlock the cover
and remove the foam block; the small metal
chopping/mixing blade (F), dough blade (G),
large metal chopping/mixing blade (H), and
stem adapter (I), are each in a cavity.
CAREFULLY REMOVE THE METAL
CHOPPING/MIXING BLADE BY GRASPING
THE CENTER WHITE HUB AND LIFTING IT
STRAIGHT UP. NEVER TOUCH THE BLADES,
AS THEY ARE RAZOR SHARP.
10. Pull out the drawer to the storage case with
the adjustable slicing disc (J), and
CAREFULLY REMOVE IT BY USING THE
PLASTIC HUB. DO NOT TOUCH THE
BLADE; IT IS VERY SHARP. The reversible
shredding disc (K) is also in the drawer.
Carefully remove the slicing disc by using
the plastic hub, and carefully remove the
shredding disc by using the plastic hub.
Remember to lock the parts in the storage
case when not in use.
11. Save the shipping cartons and plastic foam
blocks. You will find them very useful if you
need to repack the processor for moving or
other shipment.
NOTE: We recommend that you visit our
website, www.cuisinart.com for a fast, efficient
way to complete your product registration.
A
E
Storage Cover
with Lock
F
Drawer
K
J
3
B
C
G
H
I
D