Advertisement
Turn on
To turn on the receiver, first, make sure that the battery is loaded securely
then push the power switch to "ON" position. The green LED (LED 1) indicator will be
flashing for searching GPS satellites. The blue LED (LED 3) indicator will start flashing
for searching Bluetooth device.
Turn off
To turn off the receiver, push the power switch to "OFF" position. All of
the LED indicators will turn off.
Low Power & Charging
battery power becomes low. Connect the receiver to a power source to recharge the
battery. When the battery is being charging, LED2 will turn YELLOW. When fully
charged, the YELLOW indicator will switch OFF. Please charge the battery fully before
first use.
The second LED (LED 2) indicator will turn RED when
Reference
4
Advertisement
