Maintenance And Service - Bosch PBD 40 Original Instructions Manual

OBJ_BUCH-1183-006.book Page 23 Thursday, September 12, 2013 11:11 AM
– Drill with uniform feed until the desired drilling depth is in-
dicated on the display.
Adjusting the Drilling Depth (see figure J)
With the depth stop 9, the drilling depth t can be determined.
– Loosen clamping lever 8 in anticlockwise direction.
– Carry out a test drilling. When the desired drilling depth t is
indicated on display 14 (see "Indicating the Drilling
Depth", page 22), retighten clamping lever 8 again.
For the following drillings, the drilling depth is limited to
the setting t.
Transport
– When transporting the machine, hold it by the base plate
1.
 The power tool should always be carried by two per-
sons in order to avoid back injuries.

Maintenance and Service

Maintenance and Cleaning
 Before any work on the machine itself, pull the mains
plug.
 For safe and proper working, always keep the machine
and ventilation slots clean.
If required, clean the drilling column 4 with a dry cloth and ap-
ply a light coat of Bosch universal cutting oil (accessory).
If the replacement of the supply cord is necessary, this has to
be done by Bosch or an authorized Bosch service agent in or-
der to avoid a safety hazard.
Adjusting the Brake of the Motor Unit (see figure K)
The clamping force of the brake for the motor unit 12 can be
readjusted.
Checking:
– The clamping force of the brake must securely hold the mo-
tor unit in any position.
Adjusting:
– Turn both set screws 34 in anticlockwise direction with the
supplied Allen key 23 to reduce the clamping force, or in-
crease the clamping force by turning in clockwise direc-
tion.
Tighten both set screws uniformly.
– Check if the desired clamping force has been reached.
After-sales Service and Application Service
In all correspondence and spare parts order, please always in-
clude the 10-digit article number given on the type plate of
the machine.
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
Bosch Power Tools
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: (0844) 7360109
Fax: (0844) 7360146
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-Mail: bsctools@icon.co.za
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: (031) 7012120
Fax: (031) 7012446
E-Mail: bsc.dur@za.bosch.com
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Milnerton
Tel.: (021) 5512577
Fax: (021) 5513223
E-Mail: bsc@zsd.co.za
English | 23
1 619 929 L21 | (12.9.13)