Options - Samsung WA45K7100A series User Manual

Cycle
Rinse + Spin
Spin

Options

Child Lock
Child Lock prevents children from playing
with your washer.
Activating the Child Lock function
Press and hold Spin and Soil Level
simultaneously for approximately 3 seconds.
• When you activate the Child Lock
function, the
blinks.
Using the Child Lock function
If the lid is opened when the Child Lock
function is on, "dC" is displayed and an
alarm sounds.
• If the water level in the tub is above the
safe water level, "dC" is displayed on the
LED display and the washer starts to
drain water by force after 30 seconds.
• If the water level in the tub is above
the safe water level and the Child Lock
function is turned on while the door
is open, "CL" is displayed on the LED
display even if the power of the washer
is turned off and the washer drains
water by force.
WA7700K_WA45K-03520S-00_EN.indd 33
Use for loads that need rinsing only or to add rinse-added
fabric softener to a load.
Drains the water and spins at a high speed.
Child Lock indicator
Description
• Even if the power of the washer is
turned off, if the lid is opened while the
water level in the tub is above the Reset
water level, "CL" is displayed on the LED
display without the alarm sounding and
the washer starts to drain water. When
the draining operation finishes, the
power is automatically turned off again.
• You have activated the Child Lock
function while the washer is running, the
Start/Pause button will not work.
• After the compulsory drain, the "CL"
blinks at 1 second intervals and the
product enters the "CL" mode. (When
the product is in the "CL" mode, only the
Power button works.)
• To cancel the "CL" mode, you need to
turn the power off and then on again.
• To cancel the "dC" mode, deactivate the
Child Lock function. To deactivate the
Child Lock function, press and hold Spin
and Soil Level simultaneously for at least
3 seconds.
English 33
2015/12/16 19:08:29