Related Manuals for Samsung WA45K7600A Series
Summary of Contents for Samsung WA45K7600A Series
- Page 1 Washer User manual WA45K7600A* / WA45K7100A* SSEC WA7700K_WA45K-03520S-00_EN.indd 1 2015/12/16 19:08:23...
-
Page 2: Table Of Contents
Contents Safety information What you need to know about the safety instructions Important safety symbols Important safety precautions Installation Unpacking your washer Overview of your washer Basic location requirements Important note to installer Step-by-step installation Operating instructions Loading your washer Getting started Washing a load of laundry Control panel... - Page 3 Specifications Fabric care chart Helping the environment Declaration of conformity Specification sheet Cycle chart SAVE THESE INSTRUCTIONS English 3 WA7700K_WA45K-03520S-00_EN.indd 3 2015/12/16 19:08:23...
-
Page 4: Safety Information
Safety information Congratulations on your new Samsung washer. This manual contains important information on the installation, use and care of your appliance. Please take some time to read this manual to take full advantage of your washer’s many benefits and features. -
Page 5: Important Safety Precautions
These warning signs are here to prevent injury to yourself and others. Please follow them explicitly. After reading this manual, store it in a safe place for future reference. Read all instructions before using the appliance. As with any equipment that uses electricity and moving parts, potential hazards exist. To safely operate this appliance, familiarize yourself with its operation and exercise care when using it. - Page 6 Safety information 10. Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for 2 weeks or more, before using a washer or combination washer-dryer, turn on all hot water faucets and let the water flow from each for several minutes.
- Page 7 • Never plug the power cord into a socket that is not grounded correctly. Make sure the socket you use is grounded in accordance with local and national codes. Do not install this appliance near a heater or flammable material. Do not install this appliance in a humid, oily, or dusty location, or in a location exposed to direct sunlight or water (rain drops).
- Page 8 Safety information Critical usage warnings WARNING If the appliance is flooded, cut the power immediately and contact your nearest service center. If the appliance emits a strange noise, a burning smell, or smoke, unplug the power plug immediately and contact your nearest service center. • Failing to do so may result in electric shock or fire.
- Page 9 Do not let children or infirm persons use this washer unsupervised. • Failing to do so may result in electric shock, burns or injury. Do not insert your hand or a metal object under the washer while it is operating. • This may result in injury.
- Page 10 Safety information • If the washer is used when it is flooded because of a draining problem, it may result in electric shock or fire due to electric leakage. Do not insert your hand under the washer. • This may result in injury. Insert the laundry into the washer completely so that laundry does not get caught in the lid.
- Page 11 • This may result in electric shock or injury due to water leakage. Do not insert your hand into the detergent dispenser after opening it. • This may result in injury as your hand may be caught. Do not place any non-laundry objects, such as shoes, food waste, or animals into the washer. • This can cause abnormal vibrations that can damage the washer, and, in the case of pets, cause severe injury or death.
- Page 12 Safety information • If you wash throw rugs or doormats, the sand will accumulate inside the washer. It may result in error such as no draining. Critical cleaning warnings WARNING Do not clean the appliance by spraying water directly onto it. Do not use the strong acid cleaning agent.
-
Page 13: Installation
Unpack your washer and inspect it for shipping damage. Make sure you have received all the items shown below. If your washer was damaged during shipping, or you do not have all of the items, contact 1-800-SAMSUNG (1-800-726-7864). To prevent personal injury or strain, wear protective gloves whenever lifting or carrying the unit. -
Page 14: Overview Of Your Washer
Overview of your washer Make sure all the parts are included in the product package. If you have a problem with the washer or the parts, contact a local Samsung customer center or the retailer. 01 Drain hose 02 Hose guide... - Page 15 Philips screwdriver Level NOTE • If you lose an accessory and want to purchase a replacement, contact the Samsung service center (1-800-SAMSUNG (1-800-726-7864)). • The design of the parts and accessories may differ from the pictures above. Their design is subject to change without notice for product improvement.
-
Page 16: Basic Location Requirements
Installation Basic location requirements Electrical WARNING • 120 Volt 60 Hz 15 AMP fuse or circuit An improperly connected equipment- breaker. grounding conductor can increase the risk • Individual branch circuit serving only of electrical shock. Check with a qualified your Washer is recommended. - Page 17 The water faucets must be within 4 feet Never install your washer on a platform or (122 cm) to the back of your Washer to weakly supported structure. match the inlet hoses provided with your Location considerations Washer. Do not install your washer in areas where NOTE water may freeze, since your washer will Accessory inlet hoses are available in...
- Page 18 Installation Recessed area Side view - closet or confined area 1 in (2.5 cm) 21 in (53.3 cm) 27.0 in (68.6 cm) 2 in (5.1 cm) 29.3 in (74.4 cm) 6 in (15.2 cm) Gap between end of water valve and the wall • Case 1.
- Page 19 Required dimensions for Installation 61.0 in (155.0 cm) (WA45K7600A*) 27.0 in (68.6 cm) 59.8 in (152.0 cm) 39.2 in (99.5 cm) (WA45K7100A*) 42.4 in (107.7 cm) (WA45K7600A*) 41.2 in (104.7 cm (WA45K7100A*) 48.0 in (310.0 cm 24.0 in (155.0 cm 29.3 in (74.4 cm) 3.0 in (7.6 cm) 42.4 in (107.7 cm)
-
Page 20: Important Note To Installer
Installation Important note to installer Please read the following instructions carefully before installing your washer. These instructions should be retained for future reference. We recommend you hire a professional to install this washer. Installation flow chart Removing the Selecting a shipping bolts Connecting the Adjusting the... - Page 21 STEP 2 Connecting the water supply hose CAUTION Before installing the water supply hoses, make sure there are rubber gaskets (B) inside the couplings (A) at both ends of each new water hose. Installing the water supply hoses without rubber gaskets can cause water leakage.
- Page 22 Installation 1. Connect the ends of the water supply hoses to the hot (B) and cold (A) faucets. 2. Tighten the fittings by hand until they are snug, and then tighten them an additional two-thirds of a turn with a wrench.
- Page 23 4. Connect the ends of the water supply hoses to the water supply intake connections at the back of the washer. CAUTION The water supply hose connected to the hot faucet must be connected to the hot water supply intake and the water hose connected to the cold faucet must be connected to the cold water supply intake.
- Page 24 Installation STEP 3 Connecting the drain hose The end of the drain hose can be positioned in three ways: Over the edge of a wash basin Secure the hose guide (A) to the side of the basin wall with a hook or to the tap with a piece of string to prevent the drain hose from moving.
- Page 25 NOTE Connect the hose guide (A) within 4 in (10 cm)* from the end of the drain hose. If the drain hose is extended more than 4 in (10 cm) beyond the end of the hose guide, mold or microorganisms could spread to the inside of the washer.
- Page 26 Installation 3. If the washer is level, the pulsator (A) is positioned at the center of the water as shown in the figure. If not, level your washer by turning the front leveling feet clockwise or counterclockwise as necessary. NOTE Turn the front leveling feet clockwise (B) to lower the washer, and counterclockwise (C) to raise the washer.
- Page 27 4 Leveling your washer” section on page 25 for instructions. STEP 7 Calibration Mode Your Samsung washer detects the laundry weight automatically. For more accurate weight detection, please run Calibration Mode after the installation. To run Calibration Mode, follow these steps: 1.
-
Page 28: Operating Instructions
Operating instructions WARNING To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following: Loading your washer • Fill the tub with dry, unfolded clothes evenly around in order to enhance washing efficiency and prevent excess wear, or wrinkling of the load. - Page 29 4. Close the lid. 5. Press Start/Pause. 6. The Wash Indicator illuminates. 7. The estimated cycle time will appear in the display. The time may fluctuate to indicate the time remaining in the cycle. NOTE The actual time required for a cycle may differ from the estimated time in the display depending on the water pressure, water temperature, detergent, and laundry.
-
Page 30: Washing A Load Of Laundry
Washing a load of laundry WARNING To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance. Control panel Press to select a desired cycle in the left-most panel. When a cycle is 01 Cycle Selector selected, the cycle indicator lights up. - Page 31 Press the button repeatedly to cycle through the different spin speed options. • High - Use for underwear, t-shirts, jeans, and sturdy cottons. • Medium - Use for jeans, wrinkle-free or wash-and-wear items, and 04 Spin synthetics. • Low - Use for delicate items needing a slow spin speed. • No Spin - Drains your washer without spinning.
-
Page 32: Cycle Overview
Washing a load of laundry Cycle overview NOTE To minimize wrinkling of laundry, select Perm Press. Cycle Description For most fabrics including cottons, linens, and normally soiled Normal garments. For sturdy, colorfast fabrics and heavily soiled garments. We Heavy Duty propose to use this function only when washing lot of heavily soiled garments. -
Page 33: Options
Cycle Description Use for loads that need rinsing only or to add rinse-added Rinse + Spin fabric softener to a load. Spin Drains the water and spins at a high speed. Options Child Lock • Even if the power of the washer is turned off, if the lid is opened while the Child Lock prevents children from playing water level in the tub is above the Reset... - Page 34 Washing a load of laundry Garment Plus NOTE You can add or take out laundry items even Adding laundry when Child Lock is on after the wash has started, as long as the To add laundry, deactivate the Child Lock Garment Plus indicator is on.
- Page 35 • When the Pre Soak cycle starts, the NOTE washer repeats a wash cycle after You can change the My Cycle settings by supplying water and then performs a repeating the process above. 18-minute soak cycle. The last saved settings will be displayed the • When the Pre Soak cycle is complete, next time you choose the My Cycle function.
-
Page 36: Washing Clothes Using The Option Button
NOTE The error code history is deleted after you Downloading the Smart Care app use this function. • Download the Samsung Laundry App 2. The Smart Care indicator is lit on the into your mobile phone from the display. Android market or Apple App store. - Page 37 6. Use the option button to select the When the cycle is finished: appropriate cycle according to the After the total cycle has finished, the power type of material: Normal, Heavy Duty, will turn off automatically. Delicates, Colors/Darks, Super Speed, 1.
-
Page 38: Atc (Auto Temperature Control)
Washing a load of laundry ATC (Auto Temperature Control) ATC is the control function that the washer controls water temperature with temperature sensor (thermistor). NOTE Because there are numerous water temperatures depending on the customer’s environments (cold areas, warm areas, various water temperatures, settings of heater temperature, etc.), ATC function in our washer maintains the certain level of wash... -
Page 39: The Basics
The basics Prewash (Water Jet & Built-in sink) Water Jet and Built-in sink help you handwash before the washing machine starts operation. Water Jet is available only when the door is open with the water level set to less than High. For prewashing, use the Built-in sink that is designed to facilitate the hand-wash. - Page 40 Washing a load of laundry [Water Jet drains] • Select a cycle and press Start/Pause. Then the washing machine drains the water to be used during the prewash. • When the washing machine is turned off before starting the wash cycle, it drains the water to be used during the prewash.
-
Page 41: Detergent Use
Detergent use Your washer is designed to use high efficiency (HE) detergents. • For the best cleaning results, use a high efficiency detergent such as Tide HE, Wisk HE, Cheer HE or Gain HE*. High efficiency detergents contain suds suppressors that reduce or eliminate suds. -
Page 42: Features
Washing a load of laundry Features Automatic dispenser Your washer has separate compartments for dispensing detergent and color-safe bleach and fabric softener. Add all laundry additives to their respective compartments before starting your washer. The automatic dispenser must always be in place before you start your washer. DO NOT open the automatic dispenser when your washer is running. - Page 43 Loading the Liquid (or Powder) detergent compartment 1. Pour the recommended amount of laundry detergent directly into the detergent compartment before starting your washer. 2. If you are using color-safe bleach, add it with the detergent to the detergent compartment. NOTE When adding color-safe bleach with detergent, it is best if both laundry products...
- Page 44 Washing a load of laundry Loading the Bleach compartment CAUTION Use the liquid chlorine bleach only. 1. Add chlorine bleach to the bleach compartment (B). DO NOT exceed the bleach compartment. NOTE • Avoid splashing or over–filling the compartment. • Never pour undiluted liquid chlorine bleach directly onto the load or into the tub.
- Page 45 Loading the fabric softener compartment 1. Pour the recommended amount of liquid fabric softener into the softener compartment (C). For smaller loads, use less than one capful. 2. Dilute the fabric softener with water until it reaches MAX FILL in the compartment.
-
Page 46: Maintaining Your Washer
Maintaining your washer Cleaning the exterior 1. Turn off the water faucets after finishing 2. Use a soft cloth to wipe up all detergent, the day’s washing. bleach or other spills as they occur. This will shut off the water supply to 3. -
Page 47: Preserving The Top Cover And The Front Frame
Preserving the top cover and the front frame Do not place any heavy or sharp objects or NOTE a detergent box on the washer. They can Since the entire washer has a high-gloss scratch or damage the top cover of the unit. finish, the surface can be scratched or damaged. - Page 48 Maintaining your washer 3. Remove the inserts from the 3 compartments. Rinse the inserts and the drawer with warm water to remove traces of accumulated laundry products. 4. To clean the drawer opening, use a small, non-metal brush to clean the recess.
-
Page 49: Self Clean
Self Clean Self Clean is a self-cleaning cycle that removes mold that may occur inside the washer. 1. Press Power. 2. Select Self Clean. Once Self Clean is selected, the only function that can be set is Delay End. 3. Press Start/Pause. Self Clean begins. CAUTION • Using Self Clean, you can clean the drum without using a cleansing agent. -
Page 50: Troubleshooting
Troubleshooting Checkpoints If you encounter a problem with the washer, first check the table below and try the suggestions. Problem Action • Make sure you use rated power for the product. Does not turn on. • Make sure the power cord is completely plugged in. • Check the fuse or reset the circuit breaker. - Page 51 Problem Action • Make sure the washing machine is set on a level floor. If the floor is not level, use the levelling feet to adjust the washing machine. • Make sure the washing machine is not contacting any other object.
- Page 52 Troubleshooting Problem Action • Fully open both water taps. • Make sure the temperature selection is correct. • Make sure the hoses are connected to the correct water taps. Flush water lines. • Disconnect the hoses and clean the screens. The hose filter screens may be clogged.
- Page 53 Problem Action • Make sure all hose connections are tight. • Make sure the water supply hose's rubber packing is in the correct position. Screw tightly again. • Make sure the end of the drain hose is correctly inserted and secured to the drain system.
-
Page 54: Information Codes
• Run cleansing cycles to sanitize periodically. • Dry the washing machine interior after a cycle has finished. If a problem persists, contact a local Samsung service center. Information codes The washer may display information codes to help you understand what is occurring with your washer better. - Page 55 Code Meaning • Make sure the cold water supply hose is firmly connected to the cold water tap. If it is connected to the hot water tap, the laundry may be deformed with some cycles. Water is not draining. • Make sure the drain hose is not frozen or clogged. • Make sure the drain hose is positioned correctly, depending on the connection type. • Clean the debris filter as it may be clogged. • Make sure the drain hose is straightened all the way to the drain system. • If the information code remains, contact a customer service centre. The electronic control needs to be checked (Over Voltage Error). • Check the PCB and wire harness.
- Page 56 “Ub” check message will be shown in the display. Display for additional rinsing. • Show additional rinsing in sensing unbalance. • Method of releasing the display. - Any key input. For any codes not listed above, call 1–800–726–7864 (1–800–SAMSUNG). 56 English WA7700K_WA45K-03520S-00_EN.indd 56 2015/12/16 19:08:35...
-
Page 57: Specifications
Specifications Fabric care chart The following symbols provide garment care The clothes washer can not ensure direction. The clothing care labels include these temperatures because the actual symbols for drying, bleaching, drying and temperature of the water entering your ironing, or dry cleaning when necessary. The washer depends on water heater settings use of symbols ensures consistency among and regional water supply temperatures. - Page 58 Specifications Heat setting Dry-clean High Dry-clean Medium Do not dry-clean Line dry / Hang to dry Any heat Drip dry No heat / Air Dry flat Iron dry or steam temperatures High Medium Warning symbols for laundering Do not wash Do not wring Do not bleach Do not tumble dry...
-
Page 59: Helping The Environment
Helping the environment • Your washer is manufactured from • Do not exceed the detergent quantities recyclable materials. If you decide to recommended in the detergent dispose of it, please observe local waste manufacturers’ instructions. disposal regulations. Cut off the power • Use stain removal products and bleaches cord so that the appliance cannot be before the wash cycle only when... -
Page 60: Specification Sheet
Specifications Specification sheet Type Top loading washer Model name WA45K7600A* WA45K7100A* A. Height 42.4 (107.7) 41.2 (104.7) B. Width 27.0 (68.6) Dimensions (inches (cm)) C. Height with lid open 61.0 (155.0) 59.8 (152.0) D. Depth 29.3 (74.4) Water pressure (psi (kPa)) 20 - 116 (137 - 800) Spin revolution 800 rpm... -
Page 61: Cycle Chart
Cycle chart Use this chart to set the best cycle and options for you laundry. NOTE Setting Temp. Spin Soil Level : factory setting H: Hot H: High H: Heavy : can be selected W: Warm M: Medium N: Normal EW: Eco Warm L: Low L: Light... - Page 62 Specifications Options Cycle Pre Soak Extra Rinse Eco Plus Normal Heavy Duty Delicates Colors/Darks Super Speed Bedding Perm Press Brilliant Whites Quick Wash ...
- Page 63 If service is not available, SAMSUNG may elect to provide transportation of the product to and from an authorized service center. SAMSUNG will repair, replace, or refund this product at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above.
- Page 64 BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE, OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
- Page 65 Ridgefield Park, NJ 07660 1-800-SAMSUNG (726-7864) www.samsung.com/us/support Visits by a Service Engineer to explain functions, maintenance or installation is not covered by warranty. Please contact your Samsung call agent for help with any of these issues. English 65 WA7700K_WA45K-03520S-00_EN.indd 65 2015/12/16 19:08:39...
- Page 66 If service is not available, SAMSUNG may elect to provide transportation of the product to and from an authorized service center. SAMSUNG will repair, replace, or refund this product at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above.
- Page 67 BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE, OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
- Page 68 1-800-SAMSUNG (726-7864) www.samsung.com/ca/support (English) www.samsung.com/ca_fr/support (French) Visits by a Service Engineer to explain functions, maintenance or installation is not covered by warranty. Please contact your Samsung call agent for help with any of these issues. 68 English WA7700K_WA45K-03520S-00_EN.indd 68 2015/12/16 19:08:39...
- Page 69 Memo WA7700K_WA45K-03520S-00_EN.indd 69 2015/12/16 19:08:39...
- Page 70 Scan this with your smartphone QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT U.S.A 1-800-SAMSUNG (726-7864) www.samsung.com/us/support www.samsung.com/ca/support (English) CANADA 1-800-SAMSUNG (726-7864) www.samsung.com/ca_fr/support (French) DC68-03520S-00_EN WA7700K_WA45K-03520S-00_EN.indd 70 2015/12/16 19:08:39...