Capresso Cafe PRO 125.05 Instructions And Warranty page 6

NOTE: It is important to have the Coffee/Steam button in the correct setting
for each function. Blue illumination for coffee, white illumination for steaming/
frothing.
c) The SELECTOR DIAL has three positions:
• LEFT ( ) brewing coffee,
• CENTER (•) standby, brewing and steaming stops,
• RIGHT ( ) steam production through the frothing wand
NOTE: It is important to have the Selector Dial in the corresponding position
to the Coffee/Steam button illumination when brewing or frothing.
d) To turn the machine off, make sure the Selector Dial is in the center "•"
position and press the ON/OFF button until the blue indicator light turns off.
NOTE: During brewing or steaming, the Coffee/Steam indicator light may
start flashing, specifying the heating system is on, maintaining the proper
temperature for brewing or steaming.
3. Before Using for the First Time
After carefully unpacking your Café PRO, wash all removable parts with warm
soapy water and rinse thoroughly. Familiarize yourself with the appliance and
read the instruction manual. To ensure the first cup of coffee tastes excellent,
you should flush the internal parts of the machine with water as follows:
a) Fill the water tank with fresh, cold water. The water level should not exceed
the "MAX" mark on the tank. Then close the water tank lid.
NOTE: The appliance has a removable water tank for easy cleaning; you can
fill the tank with fresh water directly at your sink and then put the tank back
onto the appliance, pushing down firmly to engage the base valve. Make
sure the two hooks on the back of the water tank are inserted into the
openings in the back of the machine.
b) Place the portafilter with sieve onto the machine with no coffee inside the
sieve, then insert the portafilter into the appliance from the "INSERT" position.
Push up and attach the portafilter by firmly turning it counterclockwise until
it is in the "LOCK" position.
c) Place a cup on the removable drip tray.
d) Plug the power cord into a grounded wall outlet according to the safety
instructions; press the ON/OFF button so the indicator light illuminates blue.
The Coffee/Steam indicator light will start flashing blue while the machine
is heating and will illuminate solid blue when the machine is at the right
temperature for brewing coffee.
e) Once the Coffee/Steam indicator light is solid blue, turn the Selector Dial to
the " " position. The water will flow out.
f) After about one minute, turn the Selector Dial to the center "•" position to
stop brewing, discard the hot water; now you can start brewing.
NOTE: There may be noise when pumping the water for the first time, it is
normal; the machine is releasing the air in the appliance. After about 20
seconds, the noise will disappear.
6.