Sony KDL-65HX920 Operating Instructions Manual page 7

For KDL-60NX720
1
Align with the two dowels of the Table-
Top Stand, and gently place the TV,
checking the f mark is facing the front.
Neck
2
Attach the TV and Table-Top Stand with
the supplied screw and hexagon wrench.
* 3 N·m {30 kgf·cm}
~
• Set the torque setting to approximately 3 N·m {30
kgf·cm}.
Detaching the Table-Top Stand
from the TV
To detach the Table-Top Stand from the TV,
remove the screws
KDL-60NX720, be sure to remove the screws
for detaching the head when the Table-Top
Stand is not attached to the TV.
For KDL-65HX920, be sure to remove the
screws
Soft cloth
~
• Do not remove the Table-Top Stand for any reason
other than to install corresponding accessories on
*
the TV.
• When removing the Table-Top Stand from the TV,
lay the display face down on a stable work surface
that is larger than the TV.
Head
• To prevent damaging the surface of the LCD
display, make sure to place a soft cloth on the work
surface.
fixed in step 3. For
at the head of the Table-Top Stand.
Head
7
GB