Table of Contents
Advertisement
EDITING A LABEL
Entering and Editing Text
Entering Text from the Keyboard
(
)
/
Adding a New Line
Move the cursor to end of the current line and press (
Line 1
NOTE
• There is a maximum number of lines of text that can be entered for
each tape width. A maximum of 5 lines for 18 mm tape, 3 lines for
12 mm tape, 2 lines for 9 mm and 6 mm tape, and 1 line for 3.5 mm
tape.
• If you press (
is displayed. Press (
Adding a New Block
To create a new block of text/lines to the right of your current text, press
(
) and (
NOTE
• A maximum of 5 blocks can be entered in one label.
• If you press (
Many Blocks!] is displayed. Press (
error message.
Deleting Text
By pressing (
To delete all text:
(
)
/
To delete all text and format settings:
(
)
/
15
Entering and Editing Text
[Create Label]
(
Line 2
) when five lines already exist, [Too Many Lines!]
) or any other key to clear the error message.
). The cursor moves to the start of the new block.
) and (
), the letters will be deleted one by one.
[Text Only]
(
[Text&Format]
) or (
)
Enter the character.
) when five blocks already exist, [Too
) or any other key to clear the
) or (
).
(
) or (
).
.
)
Label image
Advertisement
Table of Contents
