Table of Contents
Advertisement
Before connecting any external equipment, remove the mains plug from the
(*) Number of these inputs may change according to the model of your TV.
Before running first time installation, any connected
devices need to be set to standby mode.
Aerial cable:..........................................................
Connect the aerial to the ANT. socket on the rear of
the TV.
SCART lead:...........................................................
If you use a decoder or a media recorder, it is essential
that the scart cable is connected to the TV.
The DIGITAL AUDIO socket enables the connection of
a suitable surround sound system.
HDMI
(High-Definition Multimedia Interface) is for
®
using with a DVD decoder or other equipment with
digital audio and video output. It is designed for best
performance with 1080i and 1080p high-definition video
signals but will also accept and display VGA, 480i,
480p, 576i, 576p and 720p signals. PC format signals
will also be displayed.
Connecting External Equipment
NOTE: Although this TV is able to connect to HDMI
equipment, it is possible that some equipment may
not operate
correctly.
A wide variety of external equipment can be con-
nected to the TV; therefore, the relevant owner's
manuals for all additional equipment must be re-
ferred to for exact instructions.
If the TV automatically switches over to monitor
external equipment, return to normal TV by pressing
the desired programme position button. To recall
external equipment, press SOURCE -
repeatedly to switch between sources.
English - 8 -
wall socket.
button
Advertisement
Table of Contents
