Intended Use; Technical Data; Declaration Of Conformity - Bosch GSR Mx2Drive Professional Original Instructions Manual

OBJ_BUCH-1208-002.book Page 16 Monday, August 1, 2011 8:12 AM
16 | English
Delivery Scope
Cordless Drill/Driver.
Battery, application tools and other accessories shown or described are not part of the
standard delivery scope.
A complete overview of accessories can be found in our accessories program.

Intended Use

The machine is intended for driving in and loosening screws as well as for drilling in wood and
plastic.

Technical Data

The technical data of the machine are listed in the Table on page 229.
Please observe the article number on the type plate of your machine. The trade names of the
individual machines may vary.

Declaration of Conformity

We declare under our sole responsibility that the product described under "Technical Data"
is in conformity with the following standards or standardization documents: EN 60745 ac-
cording to the provisions of the directives 2004/108/EC, 2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider Dr. Eckerhard Strötgen
Senior Vice President Head of Product
Engineering Certification
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
11.07.2011
Noise/Vibration Information
The measured values of the machine are listed in the table on page 229.
Noise and vibrational values (vector sum of three directions) determined according to
EN 60745.
The vibration emission level given in this information sheet has been measured in accord-
ance with a standardised test given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However
if the tool is used for different applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly increase the exposure level over the
total working period.
An estimation of the level of exposure to vibration should also take into account the times
when the tool is switched off or when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working period.
2 609 140 750 | (1.8.11) Bosch Power Tools